EPEVER SOLAR Cost CONTROLLER SETUP: TRACER AN SERIES CONTROLLE
EPEVER SOLAR Cost CONTROLLER SETUP: TRACER AN SERIES CONTROLLE
Blog Article
The EPEVER Tracer AN Series Solar Demand Controller is a really effective photo voltaic controller designed for off-grid solar systems. Dependant on multiphase synchronous rectification technological know-how, it guarantees optimized Strength conversion and system stability for an array of photovoltaic (PV) programs.
Important Options in the EPEVER Tracer AN Sequence Controller
The Tracer AN collection makes use of EPEVER Photo voltaic Cost Controller technological know-how for outstanding solar Electricity harvesting. Vital characteristics incorporate:
Multiphase Synchronous Rectification (MSR) for enhanced Electricity conversion.
Highly developed MPPT Algorithm with >ninety nine% efficiency.
Dual-Stage Charging for enhanced battery daily life.
Liquid crystal display Exhibit with serious-time info checking.
Many Load Command Modes including handbook and timer.
Comprehensive Digital Protections versus overcharging, around-discharging, short circuits, and reverse polarity.
Action-by-Phase Guidebook to Organising the EPEVER Tracer AN Sequence Controller
1. Unboxing and Planning the Controller
Guarantee all elements are integrated: Tracer AN device, temperature sensor, interaction cables, and person handbook.
Confirm the model number and voltage scores match your photo voltaic panel and battery requirements.
2. Mounting the Charge Controller
Find a perfectly-ventilated, dry site near to the battery bank.
Protected the Tracer AN controller utilizing the presented mounting brackets.
Sustain correct clearance for warmth dissipation.
3. Wiring the Photo voltaic Demand Controller
Warning: Normally follow correct security protocols and ensure the system is run off ahead of connecting elements.
Stage one: Hook up the battery terminals for the charge controller (favourable to constructive, damaging to negative).
Move 2: Connect the photo voltaic panel array on the PV input terminals.
Action 3: Connect the load terminals if employing a direct load link.
Phase 4: Double-check all connections for polarity and tightness.
four. Configuring the Controller Settings
Electric power about the controller by connecting the battery initial.
Utilize the LCD display to navigate the configurations menu.
Configure:
Battery Sort: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Control Modes: Guide, timer, light Command.
5. Checking and Knowledge Logging
The Tracer AN Series supports authentic-time monitoring utilizing the MT50 remote meter.
Details might be logged via the RS485 interaction port making use of software for instance Solar Station Computer system.
Remote checking is feasible Using the EPEVER WiFi module.
six. Troubleshooting Frequent Issues
Situation 1: No Electric power Output
Look at battery voltage and connections.
Confirm PV panel voltage exceeds battery voltage.
Problem two: About-Voltage Protection
Confirm the photo voltaic array’s voltage score.
Regulate procedure parameters if required.
Concern three: No Battery Charging
Inspect PV wiring for continuity.
Confirm MPPT options in the menu.
Advantages of the Tracer AN Collection with MSR Technological innovation
The multiphase synchronous rectification technology assures:
Higher Effectiveness: Diminished energy losses through conversion.
Enhanced Dependability: Steady functionality under variable masses.
For a longer period Battery Existence: Dependable and accurate charging profiles.
Summary
The EPEVER Photo voltaic Charge Controller Click Here with multiphase synchronous rectification engineering is an Extraordinary option for optimizing solar power era and increasing battery life. By adhering to the above mentioned set up manual, end users can ensure highest effectiveness and procedure longevity.