EPEVER SOLAR Cost CONTROLLER SETUP: TRACER AN Sequence CONTROLLE
EPEVER SOLAR Cost CONTROLLER SETUP: TRACER AN Sequence CONTROLLE
Blog Article
The EPEVER Tracer AN Collection Photo voltaic Demand Controller is usually a very successful photo voltaic controller suitable for off-grid solar methods. Based upon multiphase synchronous rectification technologies, it guarantees optimized Strength conversion and technique security for a variety of photovoltaic (PV) purposes.
Key Attributes from the EPEVER Tracer AN Sequence Controller
The Tracer AN sequence utilizes EPEVER Solar Charge Controller technologies for outstanding solar Vitality harvesting. Essential capabilities involve:
Multiphase Synchronous Rectification (MSR) for enhanced Electrical power conversion.
Advanced MPPT Algorithm with >99% efficiency.
Dual-Stage Charging for enhanced battery lifestyle.
LCD Show with genuine-time info monitoring.
Numerous Load Management Modes like guide and timer.
Thorough Electronic Protections towards overcharging, more than-discharging, brief circuits, and reverse polarity.
Stage-by-Step Guide to Setting Up the EPEVER Tracer AN Series Controller
one. Unboxing and Planning the Controller
Be certain all factors are involved: Tracer AN device, temperature sensor, conversation cables, and user manual.
Validate the product range and voltage rankings match your solar panel and battery specs.
2. Mounting the Demand Controller
Pick out a very well-ventilated, dry spot near to the battery bank.
Protected the Tracer AN controller utilizing the provided mounting brackets.
Maintain correct clearance for warmth dissipation.
3. Wiring the Photo voltaic Demand Controller
Caution: Often adhere to proper protection protocols and make sure the program is powered off right before connecting parts.
Phase 1: Join the battery terminals on the charge controller (positive to favourable, detrimental to negative).
Stage 2: Join the photo voltaic panel array towards the PV enter terminals.
Phase 3: Connect the load terminals if employing a direct load connection.
Move 4: Double-Verify all connections for polarity and tightness.
four. Configuring the Controller Options
Energy on the controller by connecting the battery to start with.
Make use of the LCD Exhibit to navigate the options menu.
Configure:
Battery Style: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Regulate Modes: Manual, timer, light-weight Manage.
5. Checking and Knowledge Logging
The Tracer AN Series supports serious-time monitoring utilizing the MT50 distant meter.
Data is often logged by way of the RS485 interaction port employing software program which include Solar Station Computer system.
Remote checking is feasible with the EPEVER WiFi module.
six. Troubleshooting Common Difficulties
Problem one: No Energy Output
Check out battery voltage and connections.
Verify PV panel voltage exceeds battery voltage.
Concern 2: About-Voltage Safety
Validate the solar array’s voltage ranking.
Adjust process parameters if essential.
Challenge 3: No Battery Charging
Inspect PV wiring for continuity.
Affirm MPPT settings from the menu.
Benefits Click Here of the Tracer AN Sequence with MSR Technology
The multiphase synchronous rectification know-how guarantees:
Better Efficiency: Diminished energy losses during conversion.
Improved Reliability: Steady effectiveness below variable masses.
For a longer period Battery Existence: Consistent and precise charging profiles.
Summary
The EPEVER Solar Demand Controller with multiphase synchronous rectification engineering can be an Excellent option for optimizing solar power generation and lengthening battery everyday living. By subsequent the above mentioned set up manual, end users can be certain optimum effectiveness and process longevity.